Turnigy Accucel-6 50W 6A Balance-Lader

Turnigy Accucel-6 50W 6A Balance-Lader

Varenr.: 101-0020


Få besked, når varen kommer på lager

Turnigy Accucel 6 Balance-Lader bruger FETs modstande af meget høj kvalitet, så Li-Po og NiMH batterier kan oplades og balanceres med stor nøjagtighed.Accucel-6 kan lade LiPo/LiFe op til 6S og NiMH/NiCd optil 15S og viser individuel cellespænding under ladningen medopdatering i realtid under hele ladecyklus.

The intuitive menu system means charging and cycling is an easyprocess and can be done quickly and accurately either at the fieldby using a 12v input such as a car battery or at home with a 12vpower supply.
Bundled with the Accucel-6 is a bunch of input and output wireswhich should satisfy any charging requirement.

ATTENTION - note from the manufacturer:
There are several chargers now entering the market thatlook similar to the Accucel. These chargers are produced withcheaper FETs and are unfortunately much less accurate and veryunsafe. There has been reports of the copied chargers over-chargingpacks and not balancing correctly.
The Accucel-6 is the first charger in the market with this PCBlayout Circuit design. Any charger with the same circuit diagram ismost definitely a copy. We have tested the copied chargersourselves, their componentry is of a very low quality and themanufacturing company that has produced the copy has used a processof duplicating our CPU (MCU)s hex file and flashed a similar chip(MCU) to produce a similar product. This means they do not have theoriginal code and therefore cannot bug-test (QC) or update thecharger at any point.
Our chargers have CE and RoHS certification, proving theirsafety.
Plus, thousands of customers the world over have used our chargerswith excellent results.
Your batteries are expensive. We understand this and thats why wewill not carry low-quality charging devices.
Trust only in TURNIGY® quality charging devices.


Microprocessor controlled
Delta-peak sensitivity (NiMH/NiCd)
Individual cell balancing
Li-ion, LiPo and LiFe capable
Ni-Cd and NiMH capable
Large range of charge currents
Store function, allows safe storage current
Time limit function
Input voltage monitoring. (Protects car batteries at the field)
Data storage (Store up to 5 packs in memory)
Battery break in and cycling.

Input Voltage: 11~17v
Circuit power: Max Charge: 50W / Max Discharge: 5W
Charge Current Range: .1~6.0A
Ni-MH/NiCd cells: 1~15
Li-ion/Poly cells: 1~6
Pb battery voltage: 2~20v
Weight: 355g

This charger has a JST-XH charge plug, which makes it compatible with Zippy,HXT, TURNIGY and any pack with a JST-XH adapter.